Passaponti Metal Cleaning Technology Washing Machines




front loading - automatic - compact - environment friendly


AGI-DIP® ECOMATIC washers represent the natural evolution of the AGI-DIP® washers either for the use as single or as modular units, without adaptors or accessories: simply, two or more machines in line form an extremely compact system.

Completely closed, the AGI-DIP® ECOMATIC washers are equipped with a front door and a platform to ease the load/unload operations and the transfer of baskets from one to the other machine

Immersion cleaning washing machine front loading

Due to their compactness, a front of only 1,5 metres is sufficient for a wash-rinse-protection process composed by three machines with a basket of mm. 480x320x200H and they require only 2 metres if a drying stage is included.

Designed to operate at ambient temperature or with hot liquids, the AGI-DIP washers can be used for all surface treatments that are typical in the mechanical industry like degreasing, decarbonizing, stripping, derusting, passivation, phosphating, rinsing, protection and more.

The operating principle is based on moving the parts inside the cleaning liquid by means of a simple and reliable air operated dunking system. A single control lifts and lowers the load platform, and produces the vertical agitation into the liquid. The washing cycle is fully automatic, timer controlled, with a complete set of high quality instruments positioned frontally and easily accessible.

The AGI-DIP® ECOMATIC washers are designed for the use with water based cleaning liquids or with non-halogenated hydrocarbons when properly equipped with safety devices to be classified as "type A1" (machines not generating flammable vapours).

Heated models are insulated and equipped with thermostat, refilling and overweir. A wide range of accessories is available such as the oil separator OILNET®, bag or cartridge type filtration systems, automatic filling and much more.

A variety of models and configurations meet all customers' requirements.

AGI-DIP® ULTRASON ECOMATIC washers are designed for the used with ultrasonic energy combined with the mechanical agitation offering the maximum of cleaning effectiveness and efficiency. Configured for ultrasounds, these washers are entirely made from AISI 316L stainless steel, are equipped with thermal and acoustic insulation and have adjustable stroke to optimize the efficiency of the ultrasonic cavitation.

The piezoelectric ultrasonic transducers with frequencies from 25 kHz till 160 kHz for all applications, are contained in a sealed case immersed into the liquid, not welded or flanged, for easy maintenance. Push-Pull® tubular transducers made from titanium with 360° radiation and even higher performances can be also supplied.

AGI-DIP® DRY ECOMATIC machines use the same principle for drying parts coming from cycles using the AGI-DIP® ECOMATIC washers. Parts are moved through a hot air stream followed by cold air to reduce their temperature and to save energy. The air temperature can be adjusted to the application.